A model beyond classic
A gem of a stereo integrated amplifier for discerning audiophiles
The L-595A SPECIAL EDITION incorporates the finest of LUXMAN’s latest circuit technologies. Our original ODNF feedback circuit, which achieves the highest initial slew rate, has evolved into the latest ODNF-u version with improved error detection circuitry. The volume control section uses the new LECUA1000 88-step electronically controlled attenuator, which minimizes sound quality deterioration at low levels, and a discrete buffer that increases the driving force of the preamplifier circuit. Copper-clad steel shielding protects the transmission path of delicate signals from external noise. The copper alloy RCA terminals have the conductivity of copper and hardness of brass.
*LECUA : Luxman Electronically Controlled Ultimate Attenuator
*ODNF : Only Distortion Negative Feedback
The L-595A SPECIAL EDITION operates in pure class A mode, eliminating crossover distortion during amplification. A rated output of 30W + 30W (8Ω) is generated by the power amplifier circuits. It's 3 stage Darlington equipped, triple paralleled push-pull configuration greatly improves S/N ratio and high-frequency distortion characteristics, bestowing a textural clarity and the drivability of a pre and power amplifier combination. The power supply section features a large, highly regulated power transformer with independent left and right channel high-capacity filter capacitors which combine to supply instantaneous power with great stability. And unique, vibration damped constructions are employed throughout. Large speaker relays with very low resistance achieve low impedance at the speaker terminals. All of these technologies contribute to achieve the finest level of musical expression expected from a pure class A product.
Design methods and housing structures are major factors that affect sound quality and timbre. Our goal was to design levels of deep musicality for the L-595A SPECIAL EDITION. The joint input/output circuit board is peel-coated without resistant green film coating which can cause high-frequency noise components. Smooth, rounded trace rounded trace patterns connect points on the custom-made, gold plated peel-coat circuit board.
The L-595A SPECIAL EDITION combines the quality of a separate amplifier and preamp with the functionality of integrated amplifiers into a single unit. The built-in phono amplifier, with MM/MC compatibility, allows you to enjoy superb analog record playback. The unit features electronically controlled bass/treble tone controls and a volume-linked loudness function that matches human hearing characteristics. There are also perfect applications for different listening environments, such as a bi-amp configuration with an added power amplifier and the SEPARATE function that enables coexistence with the surround environment of an AV amplifier. In addition, we have included our premium RA-17A aluminum remote controller that can also operate compatible CD/SACD players.
| Rated output | 30W + 30W (8Ω), 60W + 60W (4Ω) |
|---|---|
| Input sensitivity / input impedance | PHONO (MM) : 2.5mV / 47kΩ PHONO (MC) : 0.3mV / 100Ω LINE : 180mV / 47kΩ BAL.LINE : 180mV / 55kΩ MAIN IN : 550mV / 47kΩ |
| Output voltage / output impedance | PRE OUT: 1V / 600kΩ |
| Frequency response | PHONO: 20Hz to 20kHz (±0.5dB) LINE: 20Hz to 100kHz (within -3.0dB) |
| Total harmonic distortion | 0.007% or less (8Ω, 1kHz) 0.06% or less (8Ω, 20Hz to 20kHz) |
| S/N ratio (IHF-A) | PHONO (MM) : 91dB or more PHONO (MC) : 75dB or more LINE : 105dB or more |
| Volume adjustment | New LECUA1000 |
| Amplification circuit | ODNF-u |
| Output configuration | Bipolar 3-parallel push-pull |
| Damping factor | 370 |
| Max. amount of tone control | BASS: ±8dB at 100Hz TREBLE: ±8dB at 10kHz |
| Power supply | 230V~(50Hz) / 115V~(60Hz) |
| Power consumption | 330W, 230W (under no signal), 0.4W (at standby) |
| External dimensions | 440 (W) x 193 (H) x 462 (D) mm front side knob of 19mm and rear side terminal of 36mm included in depth |
| Net weight | 29.0kg (main unit) |
| Accessories | Remote control (RA-17A) |
| Speaker terminal Supported Y-lug terminal dimension | Width of part a: 16mm or less Width of part b: 7mm or more * Connection may not be performed depending on the shape of the Y-lug terminal. |
* Setting the phase inverter switch to the B position allows balance input terminal No 2 to change to HOT, and No. 3 to COLD.
* Volume mute, monaural and subsonic functions can be turned on and off with remote control
* Specifications and appearance are subject to change without notice.
* The products listed in this catalog do not include line cables. Please purchase cables separately.
| Rated output |
|---|
| 30W + 30W (8Ω), 60W + 60W (4Ω) |
| Input sensitivity / input impedance |
| PHONO (MM) : 2.5mV / 47kΩ PHONO (MC) : 0.3mV / 100Ω LINE : 180mV / 47kΩ BAL.LINE : 180mV / 55kΩ MAIN IN : 550mV / 47kΩ |
| Output voltage / output impedance |
| PRE OUT: 1V / 600kΩ |
| Frequency response |
| PHONO: 20Hz to 20kHz (±0.5dB) LINE: 20Hz to 100kHz (within -3.0dB) |
| Total harmonic distortion |
| 0.007% or less (8Ω, 1kHz) 0.06% or less (8Ω, 20Hz to 20kHz) |
| S/N ratio (IHF-A) |
| PHONO (MM) : 91dB or more PHONO (MC) : 75dB or more LINE : 105dB or more |
| Volume adjustment |
| New LECUA1000 |
| Amplification circuit |
| ODNF-u |
| Output configuration |
| Bipolar 3-parallel push-pull |
| Damping factor |
| 370 |
| Max. amount of tone control |
| BASS: ±8dB at 100Hz TREBLE: ±8dB at 10kHz |
| Power supply |
| 230V~(50Hz) / 115V~(60Hz) |
| Power consumption |
| 330W, 230W (under no signal), 0.4W (at standby) |
| External dimensions |
| 440 (W) x 193 (H) x 462 (D) mm front side knob of 19mm and rear side terminal of 36mm included in depth |
| Net weight |
| 29.0kg (main unit) |
| Accessories |
| Remote control (RA-17A) |
| Speaker terminal Supported Y-lug terminal dimension |
| Width of part a: 16mm or less Width of part b: 7mm or more * Connection may not be performed depending on the shape of the Y-lug terminal. |
* Setting the phase inverter switch to the B position allows balance input terminal No 2 to change to HOT, and No. 3 to COLD.
* Volume mute, monaural and subsonic functions can be turned on and off with remote control
* Specifications and appearance are subject to change without notice.
* The products listed in this catalog do not include line cables. Please purchase cables separately.